Yealink SIP-T2XP

Appendix
427
Intercom Key
Parameter-
memorykey.X.type
Configuration File
<y0000000000xx>.cfg
Parameter-
linekey.X.type
Description
Configures a DSS key as an intercom key.
The digit 14 stands for the key type Intercom.
For the memory key, x ranges from 1 to 10.
For the line key, x ranges from 1 to 6.
Note: It is not applicable to SIP-T19P IP phones.
Format
Integer
Value
14
Example
memorykey.1.type = 14
Parameter-
memorykey.X.line
Configuration File
<y0000000000xx>.cfg
Parameter-
linekey.X.line
Description
Configures the desired line to apply the
intercom key.
For the memory key, x ranges from 1 to 10.
For the line key, x ranges from 1 to 6.
Note: It is not applicable to SIP-T19P IP phones.
Format
Integer
Range
Valid values are:
1 to 6 (for SIP-T28P)
1 to 3 (for SIP-T26P/T22P)
1 to 2 (for SIP-T21P/T20P)
1-Line 1
2-Line 2
…
6-Line 6
Example
memorykey.1.line = 1