Yealink SIP-T2XP Administrator's Guide

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
36
firmware.
For more information, refer to
Upgrading Firmware on page
279.
Local
Web User Interface
Configure the way for the IP
phone to check for
configuration files.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-autop&q=load
To configure the way for the IP phone to check for configuration files via web user
interface:
1. Click on Settings->Auto Provision.
2. Make the desired change.
3. Click Confirm to accept the change.
When the “Power On” is set to On, the IP phone will check configuration files stored on
the provisioning server during startup and then will download firmware from the server.

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English