Yealink SIP-T2XP

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
326
Call Forward Mode
Parameter-
features.fwd_mode
Configuration File
<y0000000000xx>.cfg
Description
Configures the call forward mode for the IP
phone.
If it is set to 0 (Phone), call forward feature is
effective for the IP phone.
If it is set to 1 (Custom), you can configure call
forward feature for each account.
Format
Integer
Default Value
0
Range
Valid values are:
0-Phone
1-Custom
Example
features.fwd_mode = 0
Call Forward in Phone Mode
Always Forward
Parameter-
forward.always.enable
Configuration File
< y0000000000xx >.cfg
Description
Enables or disables always forward feature.
If it is set to 1 (Enabled), incoming calls are
forwarded to the destination number
immediately.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
forward.always.enable = 1