Enables or disables the IP phone to decrypt
configuration files using the encrypted AES
keys.
If it is set to 1 (Enabled), the IP phone will
download <y0000000000xx_Security>.enc
and <MAC_Security>.enc files during auto
provisioning, and then decrypts these files
into the plaintext keys (e.g., key2, key3)
respectively using the phone built-in key
(e.g., key1). The IP phone then decrypts the
encrypted configuration files using
corresponding key (e.g., key2, key3).
If it is set to 0 (Disabled), the IP phone will
decrypt the encrypted configuration files
using plaintext AES keys configured on the
IP phone.
Configures the plaintext AES key which is
used to decrypt the <y0000000000xx>.cfg
file.
Note: It works only if the parameter
“auto_provision.aes_key_in_file” is set to 0
(Disabled).
To Next Page
Loading...
