Yealink SIP-T2XP - Page 124

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
108
basis.
Navigate to:
http://<phoneIPAddress>/servlet
?p=account-adv&q=load&acc=
0
To configure call hold method via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of RFC 2543 Hold.
3. Click Confirm to accept the change.
To configure call hold tone and call hold tone delay via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Play Hold Tone.