Yealink SIP-T2XP - Page 139

Configuring Basic Features
123
Procedure
Group call pickup can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the group call pickup
code on a per-line basis.
Configure group call pickup
feature on a phone basis.
For more information, refer to
Group Call Pickup on page 339.
<y0000000000xx>.cfg
Assign a group call pickup key.
For more information, refer to
Group Call Pickup Key on page
423.
Local
Web User Interface
Assign a group call pickup key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&q=load&model=
0
Configure group call pickup
feature on a phone basis.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-callpickup&q=lo
ad
Configure the group call pickup
code on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0
Phone User Interface
Assign a group call pickup key.
To configure a group call pickup key via web user interface:
1. Click on DSSKey->Memory Key (Line Key or Programable Key).
SIP-T19P IP phones only support programable keys and SIP-T22P/T21P/T20P IP phones
only support line keys and programable keys.
2. In the desired DSS key field, select Group Pickup from the pull-down list of Type.
3. Enter the group call pickup code in the Value field.