Yealink SIP-T2XP

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
130
incoming call. IP phones support deriving caller identity from three types of SIP header:
From, P-Asserted-Identity and Remote-Party-ID. Identity presentation is based on the
identity in the relevant SIP header.
If the caller has existed in the local directory, the local contact name assigned to the
caller should be preferentially displayed and stored in the call log.
For more information on calling line identification presentation, refer to Calling and
Connected Line Identification Presentation on Yealink IP Phones , available online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
Procedure
CLIP can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the presentation of
the caller identity.
For more information, refer to
Calling Line Identification
Presentation on page 341.
Local
Web User Interface
Configure the presentation of
the caller identity.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0
To configure the presentation of the caller identity via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.