Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
134
3. Click on Advanced.
4. Select the desired value from the pull-down list of DTMF Type.
5. If SIP INFO or AUTO or SIP INFO is selected, select the desired value from the
pull-down list of DTMF Info Type.
6. Enter the desired value in the DTMF Payload Type (96~127) field.
7. Click Confirm to accept the change.
To configure the number of times to send the end RTP Event packet via web user
interface:
1. Click on Features->General Information.
To Next Page
Loading...
