Yealink SIP-T2XP - Page 163

Configuring Advanced Features
147
 Chile
 Czech ETSI
Configured tones can be heard on IP phones for the following conditions.
Condition
Description
Dial
When in the pre-dialing interface
Ring Back
Ring-back tone
Busy
When the callee is busy
Congestion
When the network is congested
Call Waiting
Call waiting tone
Dial Recall
When receiving a call back
Info
When receiving a special message
Stutter
When receiving a voice mail
Message
When receiving a text message
Note: It is not applicable to SIP-T20P IP phones.
Auto Answer
When automatically answering a call
Procedure
Tones can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the tones for the IP
phone.
For more information, refer to
Tones on page 350.
Local
Web User Interface
Configure the tones for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-tones&q=load
To configure tones via web user interface:
1. Click on Settings->Tones.