Yealink SIP-T2XP - Page 204

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
188
TLV Type
TLV Name
Description
and DSCP value.
Extended
Power-via-MDI
Power type, source, priority and value.
Inventory –
Hardware Revision
Hardware revision of the IP phone.
Inventory –
Firmware Revision
Firmware revision of the IP phone.
Inventory –
Software Revision
Software revision of the IP phone.
Inventory – Serial
Number
Serial number of the IP phone.
Inventory –
Manufacturer Name
Manufacturer name of the IP phone.
The default value is “yealink”.
Inventory – Model
Name
Model name of the IP phone.
Asset ID
Assertion identifier of the IP phone.
The default value is “asset”.
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure LLDP.
For more information, refer to
LLDP on page 370.
Local
Web User Interface
Configure LLDP.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load