Yealink SIP-T2XP - Page 221

Configuring Advanced Features
205
RPC Method
Description
File types supported by IP phones are:
 Firmware Image
 Configuration File
Upload
This method is used to cause the CPE to upload a
specified file to the designated location.
File types supported by IP phones are:
 Configuration File
 Log File
ScheduleInform
This method is used to request the CPE to schedule a
one-time Inform method call (separate from its
periodic Inform method calls) sometime in the future.
FactoryReset
This method resets the CPE to its factory default state.
TransferComplete
This method informs the ACS of the completion
(either successful or unsuccessful) of a file transfer
initiated by an earlier Download or Upload method
call.
AddObject
This method is used to add a new instance of an
object defined on the CPE.
DeleteObject
This method is used to remove a particular instance
of an object.
For more information on TR-069, refer to Yealink TR-069 Technote , available online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
Procedure
TR-069 can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure TR-069 feature.
For more information, refer to
TR-069 on page 383.
Local
Web User Interface
Configure TR-069 feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-preference&q=lo
ad
To configure TR-069 via web user interface:
1. Click on Settings->TR069.