Configuring Advanced Features
207
network administrator and sends out Router Advertisement announcements onto
the link. These announcements can allow the on-link connected IP phone to
configure itself with IPv6 address, as specified in RFC 4862.
Procedure
IPv6 can be configured using the configuration files or locally.
Configure the IPv6 address
assignment method.
For more information, refer to
IPv6 on page 386.
Configure the IPv6 address
assignment method.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network&q=load
To configure IPv6 address assignment method via web user interface:
1. Click on Network->Basic.
2. Select the desired address mode (IPv6 or IPv4&IPv6) from the pull-down list of
Mode (IPv4/IPv6).
To Next Page
Loading...
