Configuring Advanced Features
209
- (Optional.) If you mark the DHCP radio box, you can configure the static DNS
address in the corresponding fields.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5. Click OK to reboot the IP phone.
To configure IPv6 address assignment method via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port.
2. Press or to select IPv4&IPv6 or IPv6 from the IP Mode field.
3. Press or to highlight IPv6 and press the Enter soft key.
4. Press or to select the desired IPv6 address assignment method.
If you select the Static IPv6 Client, configure the IPv6 address and other network
parameters in the corresponding fields.
5. Press the Save soft key to accept the change
The IP phone reboots automatically to make settings effective after a period of
time.
To Next Page
Loading...
Need help?
General