Yealink SIP-T2XP Administrator's Guide

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
238
When configuring particular features, you may need to upload resource files (e.g., local
contact directory, remote phone book) to IP phones. The resources files can be local
contact directory, remote phone book and so on. Ask Yealink field application engineer
for resource file templates. If the resource file is to be used for all IP phones of the same
model, the resource file access URL is best specified in the <y0000000000xx>.cfg file.
However, if you want to specify the desired phone to use the resource file, the resource
file access URL should be specified in the <MAC>.cfg file.
This chapter provides the detailed information on how to customize the following
resource files and specify the access URL:
 Replace Rule Template
 Dial-now Template
 Softkey Layout Template
 Directory Template
 Super Search Template
 Local Contact File
 Remote XML Phone Book
 Specifying the Access URL of Resource Files
The replace rule template helps with the creation of multiple replace rules. After setup,
place the replace rule template to the provisioning server and specify the access URL in
the configuration files.
When editing a replace rule template, learn the following:
 <DialRule> indicates the start of a template and </DialRule> indicates the end of
a template.
 Create replace rules between <DialRule> and </DialRule>.
 When specifying the desired line(s) to apply the replace rule, the valid values are 0
and line ID. The digit 0 stands for all lines. Multiple line IDs are separated by
commas. This is not applicable to SIP-T19P IP phones.
 At most 100 replace rules can be added to the IP phone.
 The expression syntax in the replace rule template is the same as that introduced
in the section Dial Plan on page 67.

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English