EasyManuals Logo

Yealink SIP-T2XP Administrator's Guide

Yealink SIP-T2XP
506 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #259 background imageLoading...
Page #259 background image
Resource Files
243
The following shows an example of a directory template:
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1"
enable="1" />
<item id_name="history" display_name="History" priority="2" enable="0" />
<item id_name="remotedirectory" display_name="Remote Phone Book"
priority="3" enable="0" />
<item id_name="ldap" display_name="LDAP" priority="4" enable="0" />
</root_favorite_set>
Search source list in dialing allows the IP phone to search for entries from the desired
lists based on the entered string when in the pre-dialing screen, and then the user can
select the desired entry to dial out quickly. The lists may contain Local Directory, History,
Remote Phone Book (not applicable to SIP-T20P IP phones) and LDAP (not applicable to
SIP-T19P and SIP-T20P IP phones). You can configure the search source list in dialing using
the supplied super search template (super_search.xml). After setup, place the super
search template to the provisioning server and specify the access URL in the
configuration files.
When editing a super search template, learn the following:
Do not rename the super search template.
<root_super_search> indicates the start of a template and </root_super_search>
indicates the end of a template.
The default display names of the directory lists are Local Directory, History, Remote
Phone Book and LDAP.
When specifying the priority of search results, the valid values are 1, 2, 3 and 4. 1 is
the highest priority, 4 is the lowest.
When enabling or disabling the desired directory list, the valid values are 0 and 1.
0 stands for Disabled, 1 stands for Enabled.
Procedure
Use the following procedures to customize a super search template.
Customizing a super search template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in
the file. For example, configure the local directory list, edit the following strings:
<item id_name="local_directory_search" display_name="Local Directory"
priority="1" enable="1" />

Table of Contents

Other manuals for Yealink SIP-T2XP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T2XP and is the answer not in the manual?

Yealink SIP-T2XP Specifications

General IconGeneral
BrandYealink
ModelSIP-T2XP
CategoryIP Phone
LanguageEnglish

Related product manuals