Resource Files
245
Procedure
Use the following procedures to customize a local contact template file.
To customize a local contact file:
1. Open the template file using an ASCII editor.
2. For each group that you want to add, add the following string to the file. Each starts
on a separate line:
<group display_name="" ring=""/>
Where:
display_name="" specifies the name of the group.
ring="" specifies the desired ring tone for this group.
3. For each contact that you want to add, add the following string to the file. Each
starts on a separate line:
<contact display_name="" office_number="" mobile_number="" other_number=""
line="" ring="" group_id_name=""/>
Where:
display_name="" specifies the name of the contact (This value cannot be blank or
duplicated).
office_number="" specifies the office number of the contact.
mobile_number="" specifies the mobile number of the contact.
other_number="" specifies the other number of the contact.
line="" specifies the line you want to add this contact to.
ring="" specifies the ring tone for this contact.
group_id_name="" specifies the existing group you want to add the contact to.
4. Specify the values within double quotes.
5. Place this file to the provisioning server.
The following shows an example of a local contact file:
<root_group>
<group display_name="Friend" ring=""/>
<group display_name="Family" ring="Resource:Ring1.wav"/>
</root_group>
<root_contact>
<contact display_name="John" office_number="1001"
mobile_number="12345678910" other_number="" line="0" ring="Auto"
group_id_name="All Contacts"/>
<contact display_name="Alice" office_number="1002" mobile_number=""
other_number="" line="1,2" ring=”Resource:Ring2.wav”
To Next Page
Loading...
Need help?
General