Yealink SIP-T2XP - Page 289

Appendix
273
Address and the IP address mode is
configured as IPv4 or IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IPv4 Address
Default Value
Blank
Range
Not Applicable
Example
network.internet_port.gateway =
192.168.1.254
Parameter-
network.primary_dns
Configuration File
<MAC>.cfg
Description
Configures the primary DNS server when the
Internet port type is configured as Static IP
Address and the IP address mode is
configured as IPv4 or IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IPv4 Address
Default Value
Blank
Range
Not Applicable
Example
network.primary_dns = 202.101.103.55
Parameter-
network.secondary_dns
Configuration File
<MAC>.cfg
Description
Configures the secondary DNS server when
the Internet port type is configured as Static IP
Address and the IP address mode is
configured as IPv4 or IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IPv4 Address
Default Value
Blank