Yealink SIP-T2XP - Page 307

Appendix
291
_time_out
Description
Configures the IP phone to automatically lock
the keypad after a delay time (in seconds).
If it is set to 0 (0s), the keypad will not be
locked automatically. In this case, you need to
long press the pound key to lock the keypad.
Note: This parameter works only if the IP
phone lock type is preset.
Format
Integer
Default Value
0
Range
0 to 3600
Example
phone_setting.phone_lock.lock_time_out = 8
Parameter-
local_time.manual_time_enabl
e
Configuration File
<MAC>.cfg
Description
Configures the phone to obtain time from NTP
server or manual settings.
Format
Integer
Default Value
1
Range
Valid values are:
0-Manual
1-NTP
Example
local_time.manual_time_enable = 1
NTP Server
Parameter-
local_time.manual_ntp_srv_prior
Configuration File
<MAC>.cfg
Description
Enables or disables the phone to use
manually configured NTP server preferentially.
Format
Boolean
Default Value
0
Range
Valid values are: