Yealink SIP-T2XP - Page 310

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
294
Parameter-
local_time.dst_time_type
Configuration File
<MAC>.cfg
Description
Configures the DST type.
Note: It works only if the parameter
“local_time.summer_time” is set to 1
(Enabled).
Format
Integer
Default Value
0
Range
Valid values are:
0-By Date
1-By Week
Example
local_time.dst_time_type = 0
Parameter-
local_time.start_time
Configuration File
<MAC>.cfg
Description
Configures the time to start DST.
If “local_time.dst_time_type” is set to 0 (By
Date), use the mapping:
MM: 1=Jan, 2=Feb,…, 12=Dec
DD:1=the first day in a month,…, 31= the last
day in a month
HH:0=1am, 1=2am,…, 23=12pm
If “local_time.dst_time_type” is set to 1 (By
Week), use the mapping:
Month: 1=Jan, 2=Feb,…, 12=Dec
Week of Month: 1=the first week in a month,…,
5=the last week in a month
Day of Week: 1=Mon, 2=Tues,…, 7=Sun
Hour of Day: 0=1am, 1=2am,…, 23=12pm
Note: It works only if the parameter
“local_time.summer_time” is set to 1
(Enabled).
Format
The value formats are:
 MM/DD/HH (For By Date)
 Month/Week of Month/Day of Week/Hour
of Day (For By Week)
Default Value
1/1/0