Yealink SIP-T2XP - Page 316

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
300
If it is set to 1 (Enabled), the LCD screen will
display the custom text logo.
Format
Integer
Default Value
0
Note: For SIP-T28 IP phones, the default value is
1.
Range
Valid values are:
0-Disabled
1-System logo
2-Custom logo
Note: For SIP-T28 IP phones, valid values are
1(System logo) and 2(Custom logo). For
SIP-T20P IP phones, valid values are
0(Disabled) and 1(Enabled).
Example
phone_setting.lcd_logo.mode = 1
Parameter-
lcd_logo.url
Configuration File
<y0000000000xx>.cfg
Description
Configures the access URL of custom logo file.
Note: It is not applicable to SIP-T20P IP phones.
Format
URL
Default Value
Blank
Range
String within 511 characters
Example
The following example uses HTTP to download
the custom logo file (logo.dob) from the
provisioning server 192.168.10.25.
lcd_logo.url = http://192.168.10.25/logo.dob
Parameter-
phone_setting.lcd_logo.text
Configuration File
<y0000000000xx>.cfg
Description
Configures a text logo.
Note: It is only applicable to SIP-T20P IP
phones.
Format
String
Default Value
Yealink