Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
18
2. The message “Initializing, Please Wait” appears on the LCD screen when the IP
phone starts up.
3. The main LCD screen displays the following:
Time and date
Soft key labels (not applicable to SIP-T20P IP phones)
4. Press the OK key to check the IP phone status, the LCD screen displays the valid IP
address, MAC address, firmware version, etc.
If the IP phone has successfully passed through these steps, it starts up properly and is
ready for use.
Icons associated with different features may appear on the LCD screen. The following
table provides a description for each icon on IP phones.
To Next Page
Loading...
Need help?
General