Yealink SIP-T2XP - Page 352

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
336
Parameter-
transfer.blind_tran_on_hook_ena
ble
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to complete
the blind transfer through on-hook.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
transfer.blind_tran_on_hook_enable = 1
Parameter-
transfer.on_hook_trans_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to complete
the semi-attended transfer or the attended
transfer through on-hook.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
transfer.on_hook_trans_enable = 1
Parameter-
transfer.semi_attend_tran_enable
Configuration File
<y0000000000xx>.cfg
Description
Configures whether to display the missed
call prompt on the destination party’s phone
when performing a semi-attended transfer.
Format
Boolean
Default Value
1
Range
Valid values are: