Yealink SIP-T2XP - Page 354

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
338
Parameter-
transfer.tran_others_after_conf_e
nable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables Transfer on Conference
Hang Up feature.
If it is set to 1 (Enabled), the other two parties
remain connected when the conference
initiator drops the conference call.
Note: It is only applicable to the local
conference.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
transfer.tran_others_after_conf_enable = 1
Phone Basis
Parameter-
features.pickup.direct_pickup_e
nable
Configuration File
<MAC>.cfg
Description
Enables or disables the IP phone to display
the DPickup soft key when the IP phone is
off-hook.
Note: It is not applicable to SIP-T20P IP
phones.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
features.pickup.direct_pickup_enable = 1