Yealink SIP-T2XP - Page 361

Appendix
345
Parameter-
features.dtmf.hide
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to suppress
the display of DTMF digits.
If it is set to 1 (Enabled), the DTMF digits are
displayed as asterisks.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
features.dtmf.hide = 1
Parameter-
features.dtmf.hide_delay
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to display
the DTMF digits for a short period before
displaying asterisks.
Note: It works only if the parameter
“features.dtmf.hide” is set to 1 (Enabled). It is
not applicable to SIP-T20P IP phones.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
features.dtmf.hide_delay = 1
Parameter-
features.dtmf.replace_tran
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables transfer via DTMF