Yealink SIP-T2XP - Page 379

Appendix
363
automatically change the phone status to
available.
Format
Boolean
Default Value
0
Value
Valid values are:
0-Disabled
1-Enabled
Example
acd.auto_available = 1
Parameter-
acd.auto_available_timer
Configuration File
<y0000000000xx>.cfg
Description
Configures the length of time (in seconds)
before the IP phone state is automatically
changed to available.
Note: It works only if the parameter
“acd.auto_available” is set to 1 (Enabled).
Format
Integer
Default Value
60
Value
0 to 120
Example
acd.auto_available_timer = 60
Parameter-
account.X.subscribe_mwi
Configuration File
<MAC>.cfg
Description
Enables or disables the IP phone to
subscribe the message waiting indicator to
the account for account X.
If it is set to 1 (Enabled), the IP phone will
send a SUBSCRIBE message to the server
for message-summary updates.
X ranges from 1 to 6.
Format
Boolean
Default Value
0
Value
Valid values are:
0-Disabled