Yealink SIP-T2XP Administrator's Guide

Appendix
373
Parameter-
account.X.sip_server.Y.failback_tim
eout
Configuration File
<MAC>.cfg
Description
Configures the timeout (in seconds) for the IP
phone to retry to send requests to the
primary server after failing over to the
current working server when the parameter
“account.X.sip_server.Y.failback_mode” is set
to 3 (duration).
If you set the parameter to 0, the IP phone
will not send requests to the primary server
until a failover event occurs with the current
working server.
X ranges from 1 to 6.
Y ranges from 1 to 2.
Format
Integer
Default Value
3600
Range
0, 60 to 65535
Example
account.1.sip_server.1.failback_timeout =
3600
Parameter-
account.X.sip_server.Y.register_on_
enable
Configuration File
<MAC>.cfg
Description
Enables or disables the IP phone to register
to the secondary server before sending
requests to the secondary server in the
failover mode.
X ranges from 1 to 6.
Y ranges from 1 to 2.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
account.1.sip_server.1.register_on_enable
= 0

Yealink SIP-T2XP Specifications

General

Brand	Yealink
Model	SIP-T2XP
Category	IP Phone
Language	English