Yealink SIP-T2XP

Appendix
375
Parameter-
network.lldp.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables LLDP feature on the IP
phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
network.lldp.enable = 1
Parameter-
network.lldp.packet_interval
Configuration File
<y0000000000xx>.cfg
Description
Configures the amount of time (in seconds)
between the transmissions of LLDP packet.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It works only if the parameter
“network.lldp.enable” is set to 1 (Enabled).
Format
Integer
Default Value
60
Range
1 to 3600
Example
network.lldp.packet_interval = 60
Internet Port
Parameter-
network.vlan.internet_port_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to insert