certificate used for authentication.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to EAP-TLS,
PEAP-MSCHAPv2 and
EAP-TTLS/EAP-MSCHAPv2 protocols. The
format of the certificate must be *.pem,
*.crt, *.cer or *.der.
String within 511 characters
network.802_1x.root_cert_url =
http://192.168.1.10/ca.pem
Parameter-
network.802_1x.client_cert_url
Configuration File
<y0000000000xx>.cfg
Configures the access URL of the device
certificate used for authentication.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It is only applicable to the EAP-TLS
protocol. The format of the certificate must
be *.pem or *.cer.
String within 511 characters
network.802_1x.client_cert_url =
http://192.168.1.10/ client.pem
Parameter-
managementserver.enable
Configuration File
<y0000000000xx>.cfg
Enables or disables TR-069 feature on the IP
phone.
To Next Page
Loading...
