Yealink SIP-T2XP - Page 409

Appendix
393
G723_63
G726-16
G726-24
G726-32
G726-40
iLBC
Example
account.1.codec.1.payload_type =
PCMU
Parameter-
account.X.codec.Y.priority
Configuration File
<MAC>.cfg
Description
Configures the priority for the codec.
X ranges from 1 to 6.
Y ranges from 1 to 11.
Format
Integer
Default Value
For SIP-T20P/T22P/T26P/T28P IP phones:
When Y=1, the default value is 1;
When Y=2, the default value is 2;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 3;
When Y=6, the default value is 4;
When Y=7, the default value is 0;
When Y=8, the default value is 0;
When Y=9, the default value is 0;
When Y=10, the default value is 0;
When Y=11, the default value is 0.
For SIP-T19P/T21P IP phones:
When Y=1, the default value is 1;
When Y=2, the default value is 2;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 3;
When Y=6, the default value is 4;
When Y=7, the default value is 0;
When Y=8, the default value is 0.