Configuring Basic Features
45
5. Enter the HTTPS port number in the HTTPS Port (1~65535) field.
The default HTTPS port number is 443.
6. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
7. Click OK to reboot the IP phone.
To configure web server type via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin)
->Network->Webserver Type.
2. Press or , or the Switch soft key to select the desired value from the HTTP
Status field.
3. Enter the HTTP port number in the HTTP Port field.
4. Press or , or the Switch soft key to select the desired value from the HTTPS
Status field.
5. Enter the HTTPS port number in the HTTPS Port field.
6. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
Some menu options are protected by two privilege levels, user and administrator, each
with its own password. When logging into the web user interface, you need to enter the
user name and password to access various menu options.
A user or an administrator can change the user password. The default user password is
To Next Page
Loading...
Need help?
General