Yealink SIP-T2XP

Configuring Basic Features
49
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-phonelock&q=lo
ad
Assign a keypad lock key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&q=load&model=
0
Phone User Interface
Configure the type of phone
lock.
Assign a keypad lock key.
To configure phone lock via web user interface:
1. Click on Features->Phone Lock.
2. Select the desired type from the pull-down list of Keypad Lock Type.
3. Enter the unlock PIN in the Phone Unlock PIN (0~15 Digit) field.
4. Enter the desired time in the Phone Lock Time Out (0~3600s) field.
5. Click Confirm to accept the change.
To configure a keypad lock key via web user interface:
1. Click on DSSKey->Memory Key (Line Key or Programable Key).
SIP-T19P IP phones only support programable keys and SIP-T22P/T21P/T20P IP phones
only support line keys and programable keys.