Configuring Basic Features
53
2. Select the desired value from the pull-down list of NTP By DHCP Priority.
3. Click Confirm to accept the change.
To configure the NTP server, time zone and DST via web user interface:
1. Click on Settings->Time & Date.
2. Select Disabled from the pull-down list of Manual Time.
3. Select the desired time zone from the pull-down list of Time Zone.
4. Enter the domain names or IP addresses in the Primary Server and Secondary
Server fields respectively.
5. Enter the desired time interval in the Synchronism (15~86400s) field.
6. Select the desired value from the pull-down list of Daylight Saving Time.
To Next Page
Loading...
Need help?
General