Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
56
To configure the NTP server and time zone via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->SNTP Settings.
2. Press or , or the Switch soft key to select the time zone that applies to your
area from the Time Zone field.
The default time zone is "+8 China(Beijing)".
3. Enter the domain names or IP addresses in the NTP Server1 and NTP Server2 fields
respectively.
4. Press the Save soft key to accept the change.
To configure the time and date manually via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Manual Settings.
2. Enter the date in the Date field.
3. Enter the time in the Time field.
4. Press the Save soft key to accept the change.
To configure the time and date formats via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2. Press or , or the Switch soft key to select the desired time format from the
Clock field.
3. Press or , or the Switch soft key to select the desired date format from the
Date Format field.
4. Press the Save soft key to accept the change.
IP phones support multiple languages. Languages used on the phone user interface
and web user interface can be specified respectively as required.
The following table lists languages supported by the phone user interface and the web
user interface respectively.
English
German
Chinese_S (only applicable to
SIP-T19P and SIP-T21P IP phones)
Chinese_T (only applicable to
SIP-T19P and SIP-T21P IP phones)
French
Italian
English
German
Chinese_S (only applicable to
SIP-T19P and SIP-T21P IP phones)
French (not applicable to SIP-T19P
and SIP-T21P IP phones)
Italian
Portuguese (not applicable to
To Next Page
Loading...
Need help?
General