Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
58
The default language used on the phone user interface is English. The default language
used on the web user interface depends on the language preferences in the browser (if
the language is not supported by the IP phone, the web user interface uses English). You
can specify the languages for the phone user interface and web user interface
respectively.
Procedure
Specify the language for the phone user interface or the web user interface using the
configuration files or locally.
Specify the languages for the
phone user interface and the
web user interface.
For more information, refer to
Language on page 297.
Specify the language for the web
user interface.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-preference&q=load
Specify the language for the
phone user interface.
To specify the language for the web user interface via web user interface:
1. Click on Settings->Preference.
2. Select the desired language from the pull-down list of Language.
3. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General