Yealink SIP-T2XP - Page 165

Appendix
153
X ranges from 1 to 6.
Format
IP Address or Domain Name
Default Value
Blank
Range
Not Applicable
Example
account.1.nat.stun_server = 192.168.1.20
Parameter-
account.x.nat.stun_port
Configuration File
<MAC>.cfg
Description
Specifies the port of the STUN server.
X ranges from 1 to 6.
Format
Integer
Default Value
3478
Range
Not Applicable
Example
account.1.nat.stun_port = 3479
Parameter-
network.snmp.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the SNMP feature on the IP
phone.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
network.snmp.enable = 1
Parameter-
network.snmp.port
Configuration File
<y0000000000xx>.cfg
Description
Specifies the port used for SNMP
communication.
Note: If you change this parameter, the phone