Yealink SIP-T2XP - Page 168

Administrator’s Guide for SIP-T2xP IP Phones
156
Range
Not Applicable
Example
network.802_1x.root_cert_url =
http://192.168.1.10/ca.pem
Parameter-
network.802_1x.client_cert_url
Configuration File
<y0000000000xx>.cfg
Description
Specify the access URL of the client certificate
used for authentication.
It is only applicable to the EAP-TLS protocol.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
network.802_1x.client_cert_url =
http://192.168.1.10/ client.pem
Parameter-
managementserver.enable
Configuration File
<y0000000000xx>.cfg
Description
Configures the TR-069 on the IP phone.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
managementserver.enable = 1
Parameter-
managementserver.username
Configuration File
<y0000000000xx>.cfg
Description
Enters the username to authenticate with the