Yealink SIP-T2XP - Page 169

Appendix
157
ACS. This string is set to the empty string if no
authentication is required.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.username = user
Parameter-
managementserver.password
Configuration File
<y0000000000xx>.cfg
Description
Enters the password to authenticate with the
ACS. This string is set to the empty string if no
authentication is required.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.password = pwd123
Parameter-
managementserver.url
Configuration File
<y0000000000xx>.cfg
Description
Specifies the URL of the ACS.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.url = pwd123
Parameter-
managementserver.connectio
n_request_username
Configuration File
<y0000000000xx>.cfg