Yealink SIP-T2XP - Page 170

Administrator’s Guide for SIP-T2xP IP Phones
158
Description
Sets the username for the phone to authenticate
the incoming connection requests.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.connection_request_userna
me = acsuser
Parameter-
managementserver.connection
_request_password
Configuration File
<y0000000000xx>.cfg
Description
Sets the password for the phone to
authenticate the incoming connection
requests.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
String
Default Value
Blank
Range
Not Applicable
Example
managementserver.connection_request_pass
word = acspwd
Parameter-
managementserver.periodic_in
form_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to report its
configuration information to the ACS.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled