Yealink SIP-T2XP - Page 171

Appendix
159
Example
managementserver.periodic_inform_enable =
1
Parameter-
managementserver.periodic_in
form_interval
Configuration File
<y0000000000xx>.cfg
Description
Sets the interval (in seconds) to report its
configuration information to the ACS.
Note: If you change this parameter, the phone
will reboot to make the change take effect.
Format
Integer
Default Value
60
Range
Not Applicable
Example
managementserver.periodic_inform_interval
= 120
Parameter-
account.x.transport
Configuration File
<MAC>.cfg
Description
Enables or disables the TLS feature on the
phone.
X ranges from 1 to 6.
Format
Integer
Default Value
0 (UDP)
Range
Valid values are:
0-UDP
1-TCP
2-TLS
3-DNS SRV
Example
account.1.transport = 2
Parameter-
Configuration File