EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #178 background imageLoading...
Page #178 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
175
Default
1
Supported
Devices
CP920
Web UI
Settings > Voice > Noise Proof > Noise Suppression
Background Noise Suppression (BNS)
Background noise suppression (BNS) is designed primarily for hands-free operation and reduces background
noise to enhance communication in noisy environments.
Automatic Gain Control (AGC)
Automatic Gain Control (AGC) is applicable to the hands-free operation and is used to keep audio output at nearly
a constant level by adjusting the gain of signals in some circumstances. This increases the effective user-phone
radius and helps with the intelligibility of soft-talkers.
Voice Activity Detection (VAD)
VAD can avoid unnecessary coding or transmission of silence packets in VoIP applications, saving on computation
and network bandwidth.
Topic
VAD Configuration
VAD Configuration
The following table lists the parameter you can use to configure VAD.
Parameter
voice.vad <y0000000000xx>.cfg
Description
It enables or disables the VAD (Voice Activity Detection) feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice > Echo Cancellation > VAD
Comfort Noise Generation (CNG)
Comfort Noise Generation (CNG) is used to generate background noise for voice communications during periods of
silence in a conversation.
Note: VAD is used to send CN packets when the phone detects a “silence” period; CNG is used to generate comfortable
noise when the phone receives CN packets from the other side.
Topic
CNG Configuration
CNG Configuration
The following table lists the parameter you can use to configure CNG.
Parameter
voice.cng <y0000000000xx>.cfg
Description
It enables or disables the CNG (Comfortable Noise Generation) feature.
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals