Yealink SIP-T41S Administrator's Guide

Call Features
384
Default
Blank
Web UI
Account > Basic > Send Anonymous Rejection Code > On Code
Phone UI
Menu > Features > Anonymous Call > Send Rejection Code > On Code
Parameter
account.X.send_anonymous_rejection_code
[1]
<MAC>.cfg
Description
It configures the IP phone to send anonymous call rejection on/off code to activate/deactivate the
server-side anonymous call rejection feature for account X.
Permitted
Values
0-Off Code, the phone will send anonymous rejection off code to the server when you deactivate the
anonymous call rejection feature.
1-On Code, the phone will send anonymous rejection on code to the server when you activate the
anonymous call rejection feature.
Default
0
Web UI
Account > Basic > Send Anonymous Rejection Code
Phone UI
Menu > Features > Anonymous Call > Send Rejection Code
Parameter
account.X.anonymous_reject_offcode
[1]
<MAC>.cfg
Description
It configures the anonymous call rejection off code.
The phone will send the code to deactivate anonymous call rejection feature on server-side when you
deactivate it on the phone.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Account > Basic > Send Anonymous Rejection Code > Off Code
Phone UI
Menu > Features > Anonymous Call > Send Rejection Code > Off Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Call Waiting
Call waiting enables you to receive another call when there is already an active call on your phone. If it is disabled,
the new incoming call will be rejected automatically.
You can enable call waiting feature and set the phone to play a warning tone to avoid missing important calls dur-
ing a call.
Yealink phones also support call waiting on code and off code to activate and deactivate server-side call waiting
feature. They may vary on different servers.
Topic
Call Waiting Configuration
Call Waiting Configuration
The following table lists the parameters you can use to configure call waiting.
Parameter
call_waiting.enable <y0000000000xx>.cfg

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm