Yealink SIP-T41S Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
177
Permitted
Values
Integer from 0 to 400
Default
120
Web UI
Settings > Voice > Jitter Buffer > Normal
Parameter
voice.jib.wifi.adaptive <y0000000000xx>.cfg
Description
It configures the type of jitter buffer in the wireless network.
Permitted
Values
0-Fixed
1-Adaptive
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
voice.jib.wifi.min <y0000000000xx>.cfg
Description
It configures the minimum delay time (in milliseconds) of the jitter buffer in the wireless network.
Note: It works only if “voice.jib.wifi.adaptive” is set to 1 (Adaptive). The value of this parameter should
be less than or equal to that of “voice.jib.wifi.normal”.
Permitted
Values
Integer from 0 to 500
Default
60
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
voice.jib.wifi.max <y0000000000xx>.cfg
Description
It configures the maximum delay time (in milliseconds) of the jitter buffer in the wireless network.
Note: It works only if “voice.jib.wifi.adaptive” is set to 1 (Adaptive). The value of this parameter should
be greater than or equal to that of “voice.jib.wifi.normal”.
Permitted
Values
Integer from 0 to 500
Default
500
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Parameter
voice.jib.wifi.normal <y0000000000xx>.cfg
Description
It configures the normal delay time (in milliseconds) of the jitter buffer in the wireless network.
Note: It works only if “voice.jib.wifi.adaptive” is set to 0 (Fixed). The value of this parameter should be
greater than or equal to that of “voice.jib.wifi.min” and less than or equal to that of “voice.jib.wifi.min”.
Permitted
Values
Integer from 0 to 500
Default
240
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G,
T27G, CP920
Smart Noise Block
You can use the Smart Noise Block feature to block out the local noises when there is no speech in a call.
It is only applicable to CP920 phones.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm