EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #373 background imageLoading...
Page #373 background image
Call Features
370
Permitted
Values
0-Disabled
1-Enabled
Default
0
[1]
X is from 1 to 3.
[2]
X is from 1 to 255.
[3]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42U/T42G/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Hotline
Hotline, sometimes referred to as hot dialing, is a point-to-point communication link in which a call is automatically
directed to the preset hotline number. If you lift the handset, press the Speakerphone key or the line key, and do
nothing for a specified time interval, the phone will automatically dial out the hotline number. Yealink phones only
support one hotline number.
Note: If you do not specify a line, the phone uses the first available line to dial out the hotline number by default.
This feature works only if the Off Hook Hot Line Dialing feature is disabled. For more information, refer to Off Hook Hot Line
Dialing.
Topic
Hotline Configuration
Hotline Configuration
The following table lists the parameters you can use to configure hotline.
Parameter
features.hotline_number <y0000000000xx>.cfg
Description
It configures the hotline number that the phone automatically dials out when you lift the handset, press
the Speakerphone/off-hook key or the line key.
Leaving it blank disables hotline feature.
Note: Line key is not applicable to T19(P) E2/CP920 phones, handset and Speakerphone key are not
applicable to CP920 phones; the off-hook key is only applicable to CP920 phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > General Information > Hotline Number
Phone UI
Color Screen Phones:
Menu > Features > Others > Hot Line > Hotline Number
Black-and-white Screen Phones:
Menu > Features > Hot Line > Hotline Number
Parameter
features.hotline_delay <y0000000000xx>.cfg
Description
It configures the waiting time (in seconds) for the phone to automatically dial out the preset hotline
number.
If it is set to 0 (0s), the phone will immediately dial out the preset hotline number when you lift the
handset, press the Speakerphone/off-hook key or press the line key.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals