Yealink SIP-T41S Administrator's Guide

Account Settings
314
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.phone_setting.call_appearance.transfer_via_new_
linekey
[1]
<MAC>.cfg
Description
It enables or disables to distribute a transferring call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by this parameter takes precedence over that configured by the parameter “phone_set-
ting.call_appearance.transfer_via_new_linekey”.
Permitted
Values
0-Disabled, the phone will transfer a call on the current line key.
1-Enabled
Default
Blank
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
phone_setting.call_appearance.conference_via_new_linekey <y0000000000xx>.cfg
Description
It enables or disables to distribute a conference call to a new line key (the new line key is not seized).
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by the parameter “account.X.phone_setting.call_appearance.conference_via_new_linekey”
takes precedence over that configured by this parameter.
Permitted
Values
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Default
1
Supported
Devices
All phones except T19(P) E2 and CP920
Parameter
account.X.phone_setting.call_appearance.conference_via_new_
linekey
[1]
<MAC>.cfg
Description
It enables or disables to distribute a conference call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”. The value con-
figured by this parameter takes precedence over that configured by the parameter “phone_set-
ting.call_appearance.conference_via_new_linekey”.
Permitted
Values
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm