EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #319 background imageLoading...
Page #319 background image
Account Settings
316
The following table lists the parameters you can use to configure the default account.
Parameter
static.features.default_account <y0000000000xx>.cfg
Description
It configures the default account.
1-Account 1
2-Account 2
3-Account 3
16-Account 16
100-PSTN 1
101-PSTN 2
For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, accounts 1-16.
For T53W/T53/T43U/T42U/T42S/T42G, accounts 1-12.
For T41P/T41S/T27G, accounts 1-6.
For T40P/T40G/T23P/T23G, accounts 1-3.
For T21(P) E2, accounts 1-2.
For CP920: account 1, PSTN 1 and PSTN 2.
Permitted
Values
Integer from 1 to 16, 100, 101
Default
1
Supported
Devices
All phones except T19(P) E2
Parameter
features.show_default_account <y0000000000xx>.cfg
Description
It enables or disables the phone to display the label of the default account in the left of the status bar
on the idle screen.
Note: For T43U/T42G/T42S/T42U/T41P/T41S/T27G phones, the label of the default account is dis-
played in the middle bottom of the idle screen. It works only if “features.station_name.value” is left
blank.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
features.linekey_call_with_default_account <y0000000000xx>.cfg
Description
It enables or disables the phone to switch the default account when pressing the line key to dial.
For example, the account on line 2 is not the default account, if this feature is enabled, when pressing
the line key 2 to dial, the default account will switch to the account on line 2.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except T19(P) E2 and CP920

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals