EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #337 background imageLoading...
Page #337 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
334
ldap.extra_attr = title lang
This requires the "title" and “lang” extra attributes set for each contact record on the LDAP server.
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
ldap.display_extra_attr <y0000000000xx>.cfg
Description
It configures the extra attributes list of each record to be displayed on the phone.
The attribute must start with a “%” symbol. Multiple attributes are separated by spaces.
Example:
ldap.display_extra_attr = %title %lang
The title and lang of the contact record are displayed on the phone screen.
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
ldap.custom_extra_attr_name <y0000000000xx>.cfg
Description
It configures the custom attribute names of each record that are displayed on the phone.
The valid format is: <custom attribute name on the phone>%<attribute name on the server>. Multiple
attribute names are separated by spaces.
Example:
ldap.custom_extra_attr_name = Comment%title Language%lang
The phone screen displays "Comment: title of the contact record" and "Language: lang of the contact
record".
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
T57W, T54W, T48U, T48S, T46U, T46S
Parameter
ldap.anonymous_bind_operation.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to use anonymous identity for accessing the LDAP directory.
Note: It works only if “ldap.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, if the authentication information is not configured on the phone, the phone can use the
empty one to log into the LDAP server. But if the server does not allow anonymity to log into, the
phone prompts users to enter the corresponding user name and password.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals