Yealink SIP-T41S Administrator's Guide

Call Features
394
Note: It works only if “features.play_hold_tone.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 3 to 3600
Default
30
Web UI
Features > General Information > Hold Tone Interval(second)
Parameter
features.play_held_tone.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play the call held tone when a call is held by the other party.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > General Information > Play Held Tone
Parameter
features.play_held_tone.delay <y0000000000xx>.cfg
Description
It configures the time (in seconds) to wait for the phone to play the initial call held tone.
If it is set to 30 (30s), the phone will wait 30 seconds to play the initial call held tone after you are held
by the other party.
Note: It works only if the Music on Hold feature is disabled and “features.play_held_tone.enable” is
set to 1 (Enabled).
Permitted
Values
Integer from 3 to 3600
Default
30
Web UI
Features > General Information > Play Held Tone Delay
Parameter
features.play_held_tone.interval <y0000000000xx>.cfg
Description
It configures the time (in seconds) between subsequent call held tones.
If it is set to 3 (3s) and “features.play_held_tone.delay” is set to 30 (30s), the phone will begin to play a
held tone after a call is held by the other party for 30 seconds, and repeat the call held tone every 3
seconds.
Note: It works only if the Music on Hold feature is disabled and “features.play_held_tone.enable” is
set to 1 (Enabled).
Permitted
Values
Integer from 3 to 3600
Default
60
Web UI
Features > General Information > Held Tone Interval(second)
Parameter
phone_setting.hold_or_swap.mode <y0000000000xx>.cfg
Description
It configures the display rule of the Hold/Swap soft key when there are two calls on the phone.
Note: You can also configure the softkey layout feature to display the Hold or Swap soft key.
Permitted
Values
0-Only display the Swap soft key.
1-Only display the Hold soft key.
2-Display the Hold and Swap soft keys.
Default
0

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm