EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #424 background imageLoading...
Page #424 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
421
You can configure a directed call pickup code and pick up the incoming call using the DPickup soft key.
Tip: You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this key. For
more information, refer to DSS Keys.
The following table lists the parameters you can use to configure directed call pickup.
Parameter
features.pickup.direct_pickup_enable <y0000000000xx>.cfg
Description
It enables or disables the user to use DPickup soft key when performing the directed call pickup fea-
ture.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Default
0
Web UI
Features > Pick up & Park > Directed Call Pickup
Parameter
features.pickup.direct_pickup_code <y0000000000xx>.cfg
Description
It configures the directed call pickup code on a phone basis.
Note: The code configured by "account.X.direct_pickup_code takes precedence over that configured
by this parameter.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features > Pick up & Park > Directed Call Pickup Code
Parameter
account.X.direct_pickup_code
[1]
<MAC>.cfg
Description
It configures the directed call pickup code.
Note: The code configured by this parameter takes precedence over that configured by “fea-
tures.pickup.direct_pickup_code”.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Account > Advanced > Directed Call Pickup Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals