Yealink SIP-T41S Administrator's Guide

Advanced Features
428
Description
It configures the call park mode.
Permitted
Values
1-FAC, park a call through dialing the call park code.
2-Transfer, blind transfer the call to a shared parking lot.
Default
2
Web UI
Features > Pick up & Park > Call Park Mode
Parameter
features.call_park.enable <y0000000000xx>.cfg
Description
It enables or disables the call park feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features > Pick up & Park > Call Park
Parameter
features.call_park.park_code <y0000000000xx>.cfg
Description
It configures the call park code for FAC call park mode or configures shared parking lot for Transfer
call park mode.
Permitted
Values
String within 256 characters
Default
Blank
Web UI
Features > Pick up & Park > Call Park Code
Parameter
features.call_park.park_retrieve_code <y0000000000xx>.cfg
Description
It configures the park retrieve code for FAC call park mode or configures retrieve parking lot for Trans-
fer call park mode.
Permitted
Values
String within 256 characters
Default
Blank
Web UI
Features > Pick up & Park > Park Retrieve Code
Parameter
features.call_park.direct_send.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to dial out the call park code/park retrieve code directly when press-
ing the Park/Retrieve soft key.
Note: It works only if “features.call_park.park_mode” is set to 1 (FAC) and you have configured the
call park code/park retrieve code.
Permitted
Values
0-Disabled, the phone will enter the dialing screen when pressing the Park/Retrieve soft key. The
user can dial the specific extension manually or press the BLF/BLF List or Speed Dial key to park the
call to the specific extension or retrieve the call parked from the specific extension.
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
features.call_park.line_restriction.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to park a call using the specific line of the Call Park key.
Note: It works only if “features.call_park.park_mode” is set to 2 (Transfer).

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm