EasyManuals Logo

Yealink SIP-T41S Administrator's Guide

Yealink SIP-T41S
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #487 background imageLoading...
Page #487 background image
Advanced Features
484
Values 1-Enabled
Default
0
Parameter
account.X.sub_fail_retry_interval
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) for the phone to retry to re-subscribe when subscription fails.
Permitted
Values
Integer from 0 to 3600
Default
30
Parameter
account.X.subscribe_mwi_to_vm
[1]
<MAC>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber.
Note: It works only if “account.X.subscribe_mwi is set to 1 (Enabled) and “voice_mail.number.X” is
configured.
Permitted
Values
0-Disabled, the phone will subscribe to the message waiting indicator to a specific account.
1-Enabled
Default
0
Web UI
Account > Advanced > Subscribe MWI to Voice Mail
Parameter
voice_mail.number.X
[1]
<MAC>.cfg
Description
It configures the voice mail number.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Account > Advanced > Voice Mail
Phone UI
Menu > Message > Voice Mail > Set Voice Mail Code
Parameter
account.X.display_mwi.enable
[1]
<MAC>.cfg
Description
It enables or disables the MWI alert to indicate that you have an unread voice mail message.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Account > Advanced > Voice Mail Display
Parameter
features.voice_mail_alert.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to pop up the message when receiving the same amount of new
voicemails.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
features.voice_mail_key_lamp_field.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to subscribe to the message waiting indicator for the voice mail num-
ber when configuring a Voice Mail dsskey.

Table of Contents

Other manuals for Yealink SIP-T41S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T41S and is the answer not in the manual?

Yealink SIP-T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals